Right Extruder generates E0, Whereas Left extruder doesnt. · Issue #8780 · Ultimaker/Cura · GitHub

Application version Cura 4.7, happens in old versions too. Platform Win 10 x64 Printer Mostly all printers. Reproduction steps Load the attached model, choose ultimaker s3 or any dual machines Choose left extruder for base model and righ

Extra gcode in the files from Cura. - UltiMaker Cura - UltiMaker

3.6.0] Corrupted machine_extruder_start_code:default_value

Extruder 2 turns off the hotend early when the second material is

Cant change extruder number · Issue #15976 · Ultimaker/Cura · GitHub

4.8.0] Cura puts fails to put T1 code after printer start code and

Dual Extrusion - Move extruder to safe position · Issue #3451

Z-Seam Choice seems to affect quality/extrusion · Issue #12568

Creator 3 - Extruder Circuit/ Transfer Board – FlashForge USA

dual extruder bot extruders heat up no common heater check box to

4.0.0 Beta] Extruder Start/End G-code not written to output G-code

V0.4 Automatic Slicer Configuration · FormerLurker/Octolapse Wiki

Cura 4.4.1 Prime Tower - skipping layers for secondary extruder

3.6.0] Corrupted machine_extruder_start_code:default_value

Dual extruder disables print sequence option · Issue #7899